Русский
AIR INTERFACES TMP – Information acquisition module (radio interface) with SAW temperature sensors - IntelliSAW
The AIR INTERFACES TMP information acquisition module, part of the IntelliSAW system for continuous monitoring of the condition of medium voltage equipment, is designed to receive data via a radio channel from wireless temperature sensors using SAW technologyAIR INTERFACES TMP (IntelliSAW) radio interfaces are designed to receive data from passive SAW temperature sensors via a radio channel. Installed adjacent to SAW sensors, but subject to air insulation requirements for equipment up to 185 kV.
AIR INTERFACES TMP radio interfaces are included with the IntelliSAW Medium Voltage Monitoring System and can be connected to the IntelliSAW Critical Asset Monitoring (CAM™) module or the IRM READER module. High-quality, double-shielded coaxial cables are used to connect the air interfaces to the CAM modules to ensure no signal degradation during data acquisition.
Peculiarities
• Design for convenient placement in medium voltage switchgear
• Reliable mounting options
• Designed to collect temperature data only
Frequency range | 425 MHz – 442 MHz |
Gain | +3.0 dB typical |
Impedance | 50 ohms nominal |
Overall dimensions, WxDxH | 118.5 x 134.5 x 33 mm |
Material | polycarbonate 943, UL 94 V-0, orange |
Weight | 0.2 kg |
Installation | Magnetic: 4 magnets, pulling force 32.6 kg. Bolt-on mounting: 4 x 4.8 mm lugs. |
Interface connector | SMA |
Degree of protection | IP40 |
terms of Use | from -25? up to +70? 10 – 95% relative humidity non-condensing |
Guarantee period 1 год
