“Emak Group Middle East" LLC - DRTS 66 Device for testing all types of relay protection devices - I.S.A. - Altanova group Казахстан - Devices for testing relay protection and automation (RPiA)

Home
Testing and diagnostic systems for substation equipment
Devices for testing relay protection and automation (RPiA)
DRTS 66 Device for testing all types of relay protection devices

Article number: ENRGSKN-13

DRTS 66 Device for testing all types of relay protection devices - I.S.A. - Altanova group

The testing complex is designed to test all types of relay protection devices of all generations, from electromechanical and semiconductor to microprocessor-based with support for the IEC 61850 protocol. The device allows you to test electricity meters, converters and power quality meters.

DRTS-66 is a relay protection test complex manufactured by ISA (Italy), designed to test all types of relay protection devices of all generations - from electromechanical and semiconductor to microprocessor-based with support for the IEC 61850 protocol. The device can test electricity meters, converters and power quality meters.

DRTS-66 is equipped with six high power current sources (up to 32A) (up to 430 VA), and parallel connection allows you to output current up to 128 A and power up to 1000 VA.

The instrument has a large color display and controls for performing a range of tests without the need to connect a PC. By connecting to a PC, the full functionality of UAZiA checks becomes available using the TDMS software package, available entirely in Russian. Using special programs, you can check protections in manual and automatic modes. The ability to save test results and plans makes it easier to retest protections or retest typical protections.

List of programs

Manual control
MTZ (50-51)
Directional MTZ (67/67 N)
Distance protection (21) (with the ability to use RIO and XRIO files)
Differential protection of line and transformers (87)
Synchronism control relay (25)
Excitation loss protection (40)
Swing lock (68)
Asynchronous mode protection (78)
Relay protection and automation test plan editor
Advanced editor of test plans for relay protection and automation
Test sequencer
Playback and recording of emergency processes recorded by digital oscillograms (Comtrade)
Checking electricity meters
Checking converters
Checking power quality meters
Power system model

Additionally , the DRTS/66 ISA device can be equipped with a current amplifier for 3 currents (3x32A), a current amplifier for 6 currents (6x32A), an internal/external GPS synchronizer, an external storage device, a module for working with IEC 61850-8 and IEC 61850-9 protocols , a system for testing SHA-6 electricity meters with additional cables and various transport cases.

Functional features of DRTS-64

Output current: 6 x 32 A (3 x 420VA), 3 x 64 A (3 x 860 VA), 1 x 128 A (1 x 1000 VA)
Output voltage, 6 x 300 V (6 x 50 VA), 4 x 300 V (4 x 85 VA), 1 x 600 V (1 x 200 VA)
Frequency range of current and voltage channels from 0 to 3000 Hz
Phase angle adjustment range from 0° to 360°
Output DC voltage: 0...260 V.
Interface types: USB, Ethernet, IRIG-B
Inner memory
Ability to work without a computer
IEC 61850 protocol support
Universal TDMS Software
Large color display
Compact size and light weight

Additional equipment DRTS-66

Output expansion module and synchronization input via IRIG-B (code 87170)
Internal GPS receiver with antenna (cable length 20 m)* (code 88170)
External GPS receiver with antenna and cable (code 10161)
IEC61850-9 protocol module – Sampled Values* (code 89170)
IEC61850-8 protocol module – Goose (code 83170)
Step-down current transformer HPB 400 (for testing electromechanical protection) (code ZII70170)
Step-down current transformer HPB 600 (for testing electromechanical protection) (code ZII71170)
Step-down current transformer IN2-CDG (for testing electromechanical protection) (code 98156)
TRANSCOPE analog signal oscillography, recording and measurement module (option 82170)
Hall effect clamp meter
Universal scanning head SH-2003 for checking electricity meters (code 20162)
Additional set of test cables and accessories for connection to protections (code 15170)
Plastic transport case (dust- and moisture-proof) (code 85170)
Aluminum transport case (code 17170)
Soft transport bag (optional) (code 18170)
Synchronization device with the mains supply (code 72170)
Stand (for vertical installation of the DRTS system (code 19170)
Polarity check module (code 41175)
Laptop with bag

External amplifiers for DRTS 34

AMI/332 – 3 additional current sources (3x32A) (code 80170)
AMI/632 – 6 additional current sources (6x32A) (code 8170)

Output currents

Current outputs (range)	6 x 0..32 A /3 x 0...64 A /1 x 0...128 A /1 x 0...85 A DC
Current output power	6 x 430 VA / 3 x 860 VA / 1 x 1000 VA / 1 x 750 VA DC
Current output error	± (0.04% of reading + 0.01% of range) – guaranteed

Output voltage

Voltage outputs (range)	6 x 0…300 V /1 x 0…600 V
Voltage output power	6 x 50 VA / 4 x 85 VA / 3 x 100 VA / 1 x 200 VA
Voltage Output Accuracy	± (0.04% of reading + 0.01% of range) – guaranteed

Common to current and voltage outputs

Frequency range (current)	0 … 3000 Hz
Frequency range (voltage)	0 … 3000 Hz
Frequency range of transient signals	0 … 5000 Hz
Phase angle setting range	0°…+360°
Permission:	0.001°

Auxiliary power supply

Auxiliary auxiliary power supply

0-260 V (DC voltage) / 50 W

Digital inputs

Digital inputs (quantity)	12
Contact options	dry"; live (AC, DC)
Sampling frequency	10 kHz
Permission	0.01 ms
Pulse counters (quantity)	2
Maximum sample rate	100 kHz

Digital outputs

Discrete outputs (relay)	4
Switching voltage range	300 V AC (2400 VA) / 300 V DC (50 W)
Discrete outputs (transistor)	4 (option 87170)

AC/DC measuring inputs

Quantity	10 (option 82170)
Voltage range	600 V
Error	0.15% (max)
Sampling frequency	up to 50 kHz
Input impedance	500 kOhm // 50 pF
Measured parameters and functions	Current with clamp meter (AC + DC), Voltage (AC + DC), Phase angle, Frequency, Power, Oscilloscope, Recorder, Waveform recording in memory

Low Level Inputs

Number of outputs	6 (option 87170)
Setting range	0…12.5 Vpk
Max. exit current	5mA
Accuracy	0.015% of measured value 0.05%

Communication and control interfaces

Communication Interfaces	Ethernet, USB, USB for connecting a flash card, IRIG B
Color LCD display	256 colors, resolution 320x240 pixels, diagonal 5.7 inches
Internal memory of the device	256 MB /2000 results
Controlling the device using a PC with installed software	Eat

Dimensions and weight