“Emak Group Middle East" LLC - DTA 100C BAUR automatic transformer oil testing unit - BAUR Казахстан - Transformer oil testing and analysis facilities

Home
High Voltage Test Facilities
Transformer oil testing and analysis facilities
DTA 100C BAUR automatic transformer oil testing unit

Article number: ENRGSKN-54

DTA 100C BAUR automatic transformer oil testing unit - BAUR

DTA100C is designed for automatic measurement of the electrical breakdown strength of insulating liquids with voltages up to 100 kV.

Automatic transformer oil tester DTA100 C , manufactured by BAUR (Austria) , is designed for automatic measurement of the electrical breakdown strength of transformer oil and insulating liquids.

DTA 100C carries out breakdown testing at voltages up to 100 kV. The installation is highly accurate due to constant self-testing. Can be controlled by computer.

The breakdown voltage indicates the degree of contamination by foreign substances, such as cellulose fiber or water. The breakdown strength of the insulating liquid is an important factor in the operational reliability of a high-voltage oil-insulated device.

Functional features of DTA 100 C :

Powerful laboratory tester for long-lasting performance
Test voltage in the range 0 – 100 kVeff.
Reproducible penetration strength measurements are possible on mineral, organic (silicone) and vegetable oils
Ergonomic design for high performance, ease of use and safety in a minimal footprint
User interface in 13 languages
Reliable measurement results thanks to short breakdown times
Clear breakdown detection thanks to RBM Real Breakdown Monitoring and a new measurement principle - direct measurement of the high-voltage output voltage
Automatic self-diagnosis with high voltage output voltage check
Fully automated measurement cycle with 18 programmed test standards and 10 freely programmable measurement processes
Built-in sensor for measuring the temperature of electrical insulating liquid
Illuminated measuring cell
Ergonomic control panel with oil-resistant membrane keypad, easy-to-read color LCD display and built-in printer
Air-free measurements thanks to high-quality test cups (compatible with previous version DTA100 C cups)
Accurate setting of standard distances between electrodes
Electromagnetic shielding to prevent failures in electronic data processing systems
PC interface, including software for controlling measurement processes, creating measurement protocols and archiving (optional)

Technical characteristics of DTA 100 C :

Output voltage during dielectric strength test	0 … 100 kV (rms) symmetrical
Display	LCD color (320x240)
Digital voltage display	0 – 100 kV, ± 1 kV
Resolution (display)	0.1 kV
For insulating liquids tan d	30 MOhm
Voltage Rise Rate	0.5 – 10 kV/sec
Trip current	4 mA
Breakdown shutdown time	? 1 ms
Breakdown monitoring (RBM)	breakdown detection
Built-in sample temperature data collection function	0 … 99 °C
Permission	1 °C
Working temperature	0 °С … +45 °С
Relative humidity	? 90%
Storage temperature	-20 °С … +55 °С
PC interface	USB 2.0
Nutrition	in the range 85 – 264 V, 50/60 Hz
Power consumption	70 VA
DTA 100 complies with the following standards	IEC 61010-1, EN 61010-1, VDE 0411 part 1
Measurement Standards	ASTM D 1816-04 1 mm, ASTM D 1816-04 2 mm, ASTM D 877 / 87 PA, ASTM D 877 / 87 PB, BS EN 60156, CEI EN 60156, CSSR RVHP / 85, IEC 60156 / 1995-05, IRAM 2341/72, JIS C2101/78, PN 77/E-04408, PA SEV EN 60156, UNE EN 60156, NF EN 60156, SABS EN 60156, VDE 0370 Part 5/96, AS1767.2.1,
Additional test cycles	10 custom cycles
Dimensions, mm	545 x 458 x 380
Weight, kg	39