“Emak Group Middle East" LLC - Matrice-200 V2 Industrial quadcopter - DJI Казахстан

Home
Unmanned vehicles
Unmanned Aircraft Systems (UAS)
Matrice-200 V2 Industrial quadcopter

Article number: ENRGSKN-33

Matrice-200 V2 Industrial quadcopter - DJI

The Matrice-200 V2 quadcopter is designed for industrial inspection and thermal imaging inspection of objects in difficult weather and technical conditions. The DJI M200 has a range of 7 km, a maximum flight time of 38 minutes, and a maximum load capacity of 2 kg. Operating temperature range -20°…+40°.

The industrial line of Matrice-200 V2 drones is capable of solving absolutely all the tasks that users pose to them. From high-quality artistic photography to thermal imaging inspection or inspection of engineering structures. This drone is built with aircraft durability, all on-board electronic components are duplicated, increasing the reliability of the aircraft and allowing it to be used in the harshest conditions.

The drone body has IP43 protection, which allows it to fly in rain and snow. Powerful engines with 17-inch propellers ensure a stable board position even when flying in strong winds.

Matrice-200 V2 is one of the safest drones. It has a built-in ADS-B receiver that provides the pilot with real-time information about nearby manned aircraft.

Matrice-200 V2, unlike conventional amateur quadcopers, can be used in low temperatures down to -20°. To do this, the drone uses two batteries with a heating system.

The M200 has a flight radius of 7 km, a maximum flight time of 38 minutes, and a maximum payload of 2 kg.

The Matrice-200 V2 has a FlightAutonomy collision avoidance function on board; the drone's front, bottom and top sensors automatically recognize obstacles and prevent dangerous proximity to objects during flight.

To control the Matrice-200 V2, a specialized DJI Pilot application is used, which has two control options: manual and automatic mode, and also has the ability to work with several types of payload in real time. For efficient flight, the application has an Activetrack mode for following moving objects and shooting an object's point of interest from different angles.

Matrice-200 V2 DJI has one, standard mounting point and can be used with cameras and thermal imagers:

Zenmuse X5S – Mapping/Artistic Photography
Zenmuse X7S – Mapping/Artistic Photography
Zenmuse Z30 – industrial inspection/special. power line operations/inspection
Zenmuse XT – thermal imaging control/special. power line operations/inspection
Zenmuse XT2 – thermal imaging control/special. power line operations/inspection
Zenmuse XTS – thermal imaging control/special. power line operations/inspection

Such a variety of payloads will allow solving a large number of problems.

Main areas of application of Matrice-200 V2:

Artistic photography
3D surveying, mapping, geodesy
Inspection of industrial facilities
Inspection of power lines (PTL)
Thermal imaging diagnostics and inspection of electrical equipment
Participation in rescue operations
Online monitoring

Functional features:

Degree of dust and moisture protection IP43
Use at temperatures down to -20°
Multifunctionality
User-friendly software
Large selection of payloads
FlightAutonomy system

Drone

Model	M200 V2
Package size	790390290 mm
Dimensions (unfolded)	883886398 mm
Dimensions (folded)	722247242 mm
Addition method	Interior
Diagonal size	643 mm
Number of batteries	2
Weight (TB55)	Approx. 4.7 kg
Max. take-off weight	6.14 kg
Max. loading (2 TB55)	Approx. 1.61 kg (with two standard batteries)
Positioning accuracy (In P mode, with GPS running)	Vertical: ±0.5 m or ±0.1 m (Downward Vision System enabled) Horizontal: ±1.5 m or ±0.3 m (Downward Vision System enabled)
Max. angular velocity	Tilt: 300°/s. Rotation: 120°/s
Max. tilt angle	P Mode: 30° (Forward Vision System On: 25°), A Mode: 30°, S Mode: 35°
Max. climb speed	5 m/s
Max. rate of descent	3 m/s
Max. speed	S mode: 81 km/h P mode: 61.2 km/h Mode A: 81 km/h
Max. altitude above sea level	3000 m with 1760S propellers
Max. permissible wind speed	12 m/s
Max. flight time (without cargo, with TB55 batteries)	38 min
Max. flight time (with cargo and TB55 batteries)	24 min
Engine model	DJI 3515
Propeller model	1760S
Folding chassis	Standard
Operating temperature range	-20...+45° C
Degree of protection	IP43

Suspension configuration

One camera on the bottom of the drone	Supported
One camera on top of the drone	Not supported
Two cameras on the bottom of the drone	Not supported

Battery (main)

Model	TB55
Capacity	7660 mAh
Voltage	22.8 V
Type	Lithium polymer 6S
Energy	174.6 Wh
Weight	Approx. 885 g
Operating temperature range	-20...+50° C
Storage temperature range	Less than 3 months: -20...+50° C More than 3 months: +22...+50° C
Charging temperature range	+5...+40° C
Max. charging power	180 W

Charger

Model	IN2C180
Voltage	26.1 V
Rated power	180 W

Forward Vision System

Obstacle detection range	0.7-30 m
Viewing angle	60° (horizontal), 54° (vertical)
Operating conditions	Surface with visible texture, illumination level > 15 lux

Downward vision system

Max. speed	< 10 m/s at 2 m height
Max. height	10 m
Operating range	10 m
Operating conditions	Surface with visible texture, illumination level > 15 lux
Operating range of ultrasonic sensors	10-500 cm
Operating conditions for ultrasonic sensors	Materials that do not absorb sound, hard surface (thick carpeting impairs the performance of the sensors)

Pendants

Compatible pendants	Zenmuse X4S (discontinued)
	Zenmuse X5S
	Zenmuse X7S
	Zenmuse Z30
	Zenmuse XT
	Zenmuse XT2
	Zenmuse XTS

Remote control

Model	GL900A
Operating frequency range	2.400–2.483 GHz
Signal transmission range (in open space)	2.4 GHz: 7 km (FCC); 3.5 km (CE); 4 km (SRRC)
Transmitter power	2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC)
Video outputs	USB, HDMI
Nutrition	Large capacity Intelligent Battery (Model: WB37-4920mAh-7.6V)
Charger	DJI Charger
Possibility of connecting two users	Main and auxiliary connection
Mobile device holder	For tablet or phone
Max. mobile device width	170 mm
Output power	9 W (does not provide power to mobile device)
Operating temperature range	-20...+45° C
Storage temperature range	Less than 3 months: -20...+50° C
Storage temperature range	More than 3 months: +20...+50° C
Charging temperature range	0...+40°C
USB port power	iOS 1 A at 5.2 V (max); Android: 1.5 A at 5.2 V (max)