Butt welding machine W500 (180 mm - 500 mm), designed for welding pipes with a diameter of 180-200-225-250-315-355-400-450-500 mm.

The advantages of the W500 butt welding machine are quick installation, strong seam, fast welding.

The W500 butt welder is low maintenance, rugged and ideal for site and factory work.

The W500 butt welder allows serial welding. The work is carried out easily and in accordance with international standards.

The W500 butt welder has a choice of mechanical or electric hydraulic drive, which is easy to operate.

The W500 butt welding machine has a hydraulic system capable of welding pipes with a thickness of up to 40 bar.

The W500 butt welder grips the perimeter of the pipe, allowing fast centering of pipes and accessories.

The W500 butt welder is lightweight, making it easy to move around the construction site.

The W500 is the ideal solution for butt welding polyethylene, polypropylene, polyvinylidene fluoride (PE-PP-PVDF) pipes.

The W500 butt welder is designed to operate at 140 bar.

The operating temperature of the W500 Butt Welder is -40 C° ~+ 40 C°.

BODY (CENTRATOR) OF THE BUTT WELDING MACHINE W500

- On the body there are two movable and two static clamps supporting welded polyethylene pipes, fixing and centering them.

— The system uses hydraulic pressure.

– On the bearing axle there are two pistons, which, by means of pressure, direct the clamps forward and backward, thus performing the movements necessary for the implementation of the welding processes.

BUTT WELDING MACHINE W500

— Trimmer is designed for cleaning welded joints of pipes fixed on the centralizer and preparing them for subsequent heating. The trimmer consists of two rotating disks with knives located on the right and left.

— Circular movements of the facing element are provided by the motor and the gear group of the apparatus.

— The facing device of the W500 welding machine ensures the smoothness and parallelism of the welded pipes.

HEATER (WELDING MIRRORS) OF BUTT WELDER W500

— The heating element of the welding machine is intended for heating pipes, the surface of which was previously cleaned and leveled with a facing device.

— The temperature of the heating element is controlled by a digital thermostat located on the surface of the heating plates.

Hydraulic unit with electric control unit Butt Fusion Machine W500

— A hydraulic unit with a control unit supplies the necessary power supply to the welding mirrors and the facing device and maintains the necessary hydraulic pressure in the device.

— The hydraulic unit is controlled by a manual remote control. The remote has a switch and two buttons. Buttons provide forward and backward movement of the movable clamps. The switch is designed to turn on the facing device.

W500 BUTT WELDER STORAGE BOX

— The device storage box prevents heat loss of the heating element, acts as a support and provides protection for the heating element and facing device from external factors (impact, water, etc.).