Butt welding machine (1000 mm - 1200 mm) is designed for welding pipes with a diameter of 1000-1200-1400-1600 mm.

The advantages of the W1600 butt welding machine are quick installation, strong seam, fast welding.

The W1600 butt welder is low maintenance, rugged and ideal for site and factory work.

The W1600 butt welder allows serial welding. The work is carried out easily and in accordance with international standards.

The W1600 butt welder has an easy-to-operate optional mechanical or electric hydraulic drive.

The W1600 butt welding machine has a hydraulic system capable of welding pipes with a thickness of up to 40 bar.

The W1600 butt welder grips the perimeter of the pipe, allowing quick centering of pipes and accessories.

The W1600 Butt Fusion Machine is lightweight and easy to move around the construction site.

The W1600 is the ideal solution for butt welding polyethylene, polypropylene, polyvinylidene fluoride (PE-PP-PVDF) pipes.

The W1600 butt welder is designed to operate at a pressure of 140 bar.

The operating temperature of the W1600 Butt Welder is -40 C° ~+ 40 C°.

BODY (CENTRATOR) OF THE BUTT WELDING MACHINE W1600

- On the body there are two movable and two static clamps supporting welded polyethylene pipes, fixing and centering them.

— The system uses hydraulic pressure.

– On the bearing axle there are two pistons, which, by means of pressure, direct the clamps forward and backward, thus performing the movements necessary for the implementation of the welding processes.

BUTT WELDING MACHINE W1600

— Trimmer is designed for cleaning welded pipe joints fixed and centered on the centralizer. The trimmer consists of two rotating cutting discs on the right and left of the body, which clean and prepare pipes for subsequent heating.

— Circular movements of the facing element are provided by the motor and the gear group of the apparatus.

— Welding machine W1600 facer ensures smoothness and parallelism of welded pipes.

HEATER (WELDING MIRRORS) OF BUTT WELDER W1600

— The heating element of the welding machine is intended for heating pipes, the surface of which was previously cleaned and leveled with a facing device.

- Adjustment of the heater degrees is carried out by a digital thermostat located on the surface of the heating plates.

Electric Hydraulic Unit Butt Fusion Machine W1600

— A hydraulic unit with a control unit supplies the necessary power supply to the welding mirrors and the facing device and maintains the necessary hydraulic pressure in the device.

— The hydraulic unit is controlled by a manual remote control. The remote has a switch and two buttons. The buttons are designed to move the clamps forward and backward. The switch is designed to turn on the facing device.

W1600 BUTT WELDER STORAGE BOX

— The device storage box prevents heat loss of the heating element, acts as a support and provides protection for the heating element and facing device from external factors (impact, water, etc.).