Welding machine WELTECH W250 (75 – 250)

Description and characteristics:

The compact, transportable machine is used in the field, on the construction site, in the workshop and in cramped conditions for butt welding of polyethylene pipes and fittings. Range of welded pipes d 75 - 250 mm? PN25.

Positioner. Reinforced design, reliable fixation of pipes and fittings. Molded clamping inserts, with adjustable clamping force, do not slip. It consists of 2 movable clamps, which are driven by two hydraulic cylinders located on the guides and two fixed clamps.

Hydraulic unit with control unit. Designed for the implementation of the process of pressure welding and cooling, reduces and spreads the clamps. Protected from pollution. Equipped with: an electrical panel for connecting a heating element and a facer with an electric drive, a pressure gauge with glycerin, a safety switch, a control panel, a thermostat with electronic adjustment and maintaining the set temperature. Provides constant pressure up to 140 bar even when the hydraulic pump is switched off. Pressure range 0 to 140 bar, 220 V + 50 Hz/0.55 kW.

Manual hydraulic pump. Designed for the implementation of the process of pressure welding and cooling, reduces and spreads the clamps. Protected from pollution. Equipped with: an electrical panel for connecting a heating element and a facer with an electric drive, a pressure gauge with glycerin, a thermostat with electronic adjustment and maintaining the set temperature. Pressure range from 0 to 140 bar

Electric cutter. Closed housing, highly secure fit of the facing discs, ensuring the flatness of the pipe facing, chip removal to the outside. Equipped with a working position lock. 220 V + 50 Hz, / 0.75 kW.

A heating element. Uniform temperature distribution over the entire surface of the heating element. Special non-stick coating against sticking. The temperature is regulated 20-250?С. 220 V + 50 Hz / 3.0 kW.

Hydraulic hoses. The flexible hydraulic hoses are equipped with leak-tight quick couplings at both ends for connection to the positioner and to the hydraulic unit with control box (hydraulic hand pump).

Removable liners. Aluminum liners, each set consists of 8 half rings. d 75, 90, 110, 125, 140, 160, 180, 200, 225 mm.

Container. For storage and transportation of the heating element and trimmer. Serves as a heat insulator for the heating element.

Tool kit. A wrench for easy fixing of the positioner clamps, a square for fixing bolts on removable liners, bolts for attaching removable liners to the main clamp. Different bolt lengths are used for each diameter of the removable inserts, which ensures safety during the operation of the welding machine. Stored and transported in a portable tool box.

CNC block. The computer control unit for the welding process is designed for an automatic welding process with minimal human participation, it has a program of welding parameters that automatically controls and observes the entire welding cycle, registers the welding results in the form of a protocol for each joint, which can later be transferred to a memory card or computer, the ability to correction of data during the welding process, simple control in Russian, no additional training of the welder is required to work on the control unit, large easy-to-read display, the possibility of welding in manual mode

Dimensions and dimensions of packaging. 1 box, 120*115*85, 1.2m?

Weight of the welding machine kit. Net 218 kg, gross 282 kg.

The total power of the welding machine. 4.3 kW.

Guarantee. 12 months

Equipment:

1. Positioner

2.Hydro unit with control unit (manual hydraulic pump)

3. Hydraulic hoses - 2 pcs.

4. Power cutter

5.Heating element

6. Removable liners d 75,90,110,125,140,160,180,200,225 mm.

7.Container

8.Tool kit

9.Passport and instruction manual

Delivery time - in stock.