“Emak Group Middle East" LLC - Digital multimeter, Fluke 107 - Fluke Казахстан

Home
Test equipment
Electrical measuring instruments
Digital multimeter, Fluke 107

Article number: 58749129

Digital multimeter, Fluke 107 - Fluke

Digital multimeter The Fluke 107 Digital Multimeter adapts to your way of working! Thanks to its special shape, it fits comfortably in the palm of your hand, so you can easily use it in any working conditions. Accuracy Specifications AC voltage (40-500 Hz)1 Range Permission Error 6,000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 1.0% + 3 DC voltage in volts 6,000 V 60.00 V 600.0 V 0.001 V 0.01V 0.1V 0.5% + 3 AC voltage (millivolts) 600.0 mV 0.1 mV 3.0% + 3 Diode test2 2,000 V 0.001 V 10% Resistance (ohm) 400.0 ohm 4,000 kOhm 40.00 kOhm 40.00 kOhm 4,000 MΩ 40.00 MΩ 0.1...

от 67 396 ₸

Digital multimeter

The Fluke 107 Digital Multimeter adapts to your way of working! Thanks to its special shape, it fits comfortably in the palm of your hand, so you can easily use it in any working conditions.

Accuracy Specifications
AC voltage (40-500 Hz)1		Range	Permission	Error
		6,000 V 60.00 V 600.0 V	0.001 V 0.01 V 0.1 V	1.0% + 3
DC voltage in volts		6,000 V 60.00 V 600.0 V	0.001 V 0.01V 0.1V	0.5% + 3
AC voltage (millivolts)		600.0 mV	0.1 mV	3.0% + 3
Diode test2		2,000 V	0.001 V	10%
Resistance (ohm)		400.0 ohm 4,000 kOhm 40.00 kOhm 40.00 kOhm 4,000 MΩ 40.00 MΩ	0.1 ohm 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ	0.5% + 3 0.5% + 2 0.5% + 2 0.5% + 2 0.5% + 2 1.5% + 3
Capacity3		50.00 nF 500.0 nF 5,000 uF 50.00uF 500.0uF 1000uF	0.01 nF 0.1 nF 0.001uF 0.01uF 0.1uF 1 uF	2% + 5 2% + 5 5% + 5 5% + 5 5% + 5 5% + 5
Frequency 4 Hz (10-100 kHz)		50.00 Hz 500.0 Hz 5,000 kHz 50.00 kHz 100.0 kHz	0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz	0.1% + 3
Duty Cycle4		1% to 99%	0.10%	Typically 1%5
Alternating current (40-200Hz)		4,000 A 10.00 A	0.001 A 0.01A	1.5% + 3
D.C		4,000 A 10.00 A	0.001 A 0.01 A	1.5% + 3
All AC current, frequency and duty cycle values are defined between 1% and 100% of range. Specifications for input signals below 1% of range are not specified. Typically, the open circuit test voltage is 2.0V and the short circuit current is <0.6mA. The specified accuracy does not include the capacitance of the test leads and the floor (may be up to 1.5 nF in the 50 nF range). All AC current, frequency and duty cycle values are defined between 1% and 100% of range. Specifications for input signals below 1% of range are not specified. "Typical" means the frequency is 50Hz or 60Hz and the duty cycle is between 10% and 90%
Function	Overload protection	Input impedance (nominal)	Common mode rejection ratio	Normal mode noise rejection factor
AC voltage	600 V1	>10 MΩ <100 pF2	>60 dB at DC, 50Hz or 60Hz	?
AC voltage (millivolts)	600 mV	>1M, <100pF	> 80 dB at 50 Hz or 60 Hz	?
DC voltage in volts	600 V1	>10 MΩ <100 pF	>100 dB at DC, 50Hz or 60Hz	> 60 dB at 50 Hz or 60 Hz
6 x 105 V, max. frequency For mV (alternating current), the input impedance is approximately 1 MΩ.
General characteristics
Maximum voltage between any terminal and ground potential	600 V
LCD display	6000 counts, update rate - 3/s
Battery type	2 AAA, NEDA 24 A, IEC LR03
Battery life	Minimum 200 hours
Temperature
Operating conditionsWorking	0 °C to 40 °C
Storage:	-30 °C to +60 °C
Relative Humidity
Operating Humidity	No condensation if <10°C ≥90% at 10–30°C; ?75% at 30-40°C
Operating humidity, in the range of 40 MΩ	≥80% at 10–30°C; ?70% at 30-40°C
Height above sea level
Operating conditionsWorking	2000 m
Storage:	12000 m
Temperature coefficient	0.1 X (normalized error) / °C ( 28 °C)
Fuse protection for current inputs	11A 1000V FAST Fuse, Fluke Specified Part Only
Dimensions (L x W x H)	142mm x 69mm x 28mm
Weight	200 g
Degree of protection	IEC 60529: IP 40
Safety	IEC 61010-1: 600 V CAT III, pollution degree 2
Field of electromagnetic radiation	IEC 61326-1: Portable
Electromagnetic compatibility	Applies to use in Korea only. Class A equipment (industrial transmission and communication equipment)1
1 This device complies with the requirements for industrial (class A) electromagnetic wave equipment, and sellers and users should pay attention to it. This equipment is not intended for domestic use, commercial use only.