“Emak Group Middle East" LLC - Fluke 1503 Insulation Tester - Fluke Казахстан

Home
Test equipment
Electrical measuring instruments
Fluke 1503 Insulation Tester

Article number: 58749132

Fluke 1503 Insulation Tester - Fluke

Insulation resistance meter The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable and easy to use. Using a variety of test voltages, they are ideal for troubleshooting, commissioning and preventive maintenance. Additional features such as remote measurement help save time and money when making measurements. DC and AC voltage measurement Accuracy Range 600.0 V Permission 0.1 V 50 Hz to 400 Hz ± (% of reading + digits) ±(2%+3) Input impedance 3 MΩ (nominal), < 100 pF Common Mode Rejection Ratio (1 kΩ unbalance): > 60 dB at 50 or 60 Hz DC...

от 321 087 ₸

Insulation resistance meter

The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable and easy to use. Using a variety of test voltages, they are ideal for troubleshooting, commissioning and preventive maintenance.

Additional features such as remote measurement help save time and money when making measurements.

DC and AC voltage measurement

Accuracy

Range	600.0 V
Permission	0.1 V
50 Hz to 400 Hz ± (% of reading + digits)	±(2%+3)

Input impedance

3 MΩ (nominal), < 100 pF

Common Mode Rejection Ratio (1 kΩ unbalance):

> 60 dB at 50 or 60 Hz DC

Overload protection

600 V rms or dc

Earth resistance measurement

Range/Resolution

20.00 ohm	0.01 ohm
200.0 ohm	0.1 ohm
2000 ohm	1.0 ohm
20.00 kΩ	0.01 kΩ

Accuracy

±(1.5%+3)

Overload protection

2V rms or dc

Open circuit test voltage

> 4 V, < 8 V

Short circuit current

> 200mA

Insulation characteristics

Measuring range

1507:	0.01 MΩ to 10 GΩ
1503:	from 0.01 MΩ to 2000 MΩ

Test voltages

1507:	50V, 100V, 250V, 500V, 1000V
1503:	500V, 1000V

Test voltage error

+ 20%, - 0%

Short circuit current

1 mA, nominal

self-discharge

Discharge time < 0.5 seconds for C = 1 uF or less

Circuit voltage indicator

Disables measurement if terminal voltage > 30 V

Maximum capacitive load

Operates with loads up to 1uF

Accuracy of measurements:

50 V:	±(3% + 5)
100V:	±(3% + 5)
250V:	±(1.5% + 5)
500 V:	±(1.5% + 5)
1000 V:	±(1.5% + 5) up to 2000 MΩ, ±(10% + 3) over 2000 MΩ

General characteristics

Maximum voltage on one of the contacts:

600 VAC rms or dc

Storage temperature

-40° C to 60° C

Working temperature

-20° C to 55° C

Temperature coefficient

0.05 x (specified error)/1° C for temperatures 28° C ( 82° F)

Relative Humidity

	0% to 95% at 10° C to 30° C (50° F to 86° F)
	0% to 75% at 30° C to 40° C (86° F to 104° F)
	0% to 40% at 40° C to 55° C (104° F to 131° F)

Vibration

Random, 2g, 5-500Hz per MIL-PRF-28800F for class 2 instruments

blows

1 meter drop per IEC 61010-1 2nd edition (1 meter drop on each side to oak floor)

Electromagnetic compatibility.

In an HF field of 3 V/m, the error is equal to the specified error (EN 61326-1:1997)

Safety

Conforms to ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04 and IEC/EN 61010-1 2nd edition for measurement category IV 600 V (CAT IV)

Certification:

CSA for CSA/CAN C22.2 standard no. 61010.1-04; TUV for IEC/EN 61010-1 2nd edition

Batteries

Four AA alkaline batteries (NEDA 15 A or IEC LR6)

Battery life

When checking insulation:	The instrument can perform at least 1000 insulation measurements with new alkaline batteries at room temperature. It assumes a standard resistance measurement of 1 MΩ at 1000 V and a duty cycle of 5 seconds of voltage application and 25 seconds of pause.
When measuring resistance:	The instrument can perform up to 2500 earth ground measurements with new alkaline batteries at room temperature. A standard 1 ohm resistance measurement is assumed, consisting of 5 seconds of voltage application and a 25 second pause.

Size

5.0 cm H x 10.0 cm W x 20.3 cm D

Weight

550 g

Degree of protection

IP40

Height above sea level