“Emak Group Middle East" LLC - Ground Tester, Fluke 1623-2 - Fluke Казахстан

Article number: 58749139

Ground Tester, Fluke 1623-2 - Fluke

Earth resistance meter The Fluke 1623-2 GEO Earth Ground Tester allows you to store data and download files via USB. World-class accessories make testing easier and faster. 3- and 4-pole voltage drop, ground loop test 4-pole earth resistivity test Selective testing of ground rods with 1 clamp Electrodeless testing of ground rods with 2 clamps Degree of protection IP56 for outdoor use Durable carrying case Storage and data transfer via USB port This meter is also easy to use. With each test, the meter tells you which electrodes or clamps to connect, and the large rotary switch can be used even when wearing a glove....

от 1 808 259 ₸

Earth resistance meter

The Fluke 1623-2 GEO Earth Ground Tester allows you to store data and download files via USB. World-class accessories make testing easier and faster.

3- and 4-pole voltage drop, ground loop test
4-pole earth resistivity test
Selective testing of ground rods with 1 clamp
Electrodeless testing of ground rods with 2 clamps
Degree of protection IP56 for outdoor use
Durable carrying case
Storage and data transfer via USB port

This meter is also easy to use. With each test, the meter tells you which electrodes or clamps to connect, and the large rotary switch can be used even when wearing a glove.

Specifications
General information
Display: LCD, 1999-bit	Display with special characters, character height 25 mm, fluorescent backlight
User interface	Instant measurement with one press of the TURN and START buttons. The only active elements are the rotary switch and the START button.
Durable, water and dust resistant	The tool is designed for heavy-duty working conditions (rubber protective cover, IP56)
Memory	The amount of internal memory allows you to store up to 1500 records, available via USB.
Temperature range
Working temperature	-10°C to +50°C (14°F to 122°F)
Storage temperature	-30°C to 60°C (-22°F to 140°F)
Temperature coefficient	± 0.1% rdg/°C 28°C
Basic error	Refers to the standard temperature range and guaranteed for one year
Operation error	Dependent on operating temperature range and backed by 1 year warranty
Climate class	C1 (IEC 654-1), -5°C to +45°C (23° to +115° F), 5% to 95% r.h. wet
Protection class	IP56 for case, IP40 for battery cover according to EN60529
Safety	Protection is provided by double and/or reinforced insulation. 50 V maximum to ground. IEC61010-1: Pollution Degree 2
EMC (Emission Immunity)	IEC61326-1: Portable device
Quality system	Designed and manufactured in accordance with DIN ISO 9001
Outdoor voltage	V out, max = 24?V (DC, AC < 400?Hz), higher values difficult to measure
Suppression V out	> 120 dB (162/3, 50, 60, 400 Hz)
Measurement time	Typically 6 seconds
Max. overload	250Vrms (related to mishandling)
Extra food	6 x 1.5V alkaline batteries (type: AA LR6)
Battery life	Typically > 3,000 measurements
Dimensions (WxHxD)	250 mm x 133 mm x 187 mm (9.75" x 5.25" x 7.35")
Weight	1.1 kg (2.43 lb) including batteries 7.6 kg (16.8 lb) including accessories and batteries in carrying case
RA 3-pole earth resistance measurement (IEC 1557-5)
Switch position	R A 3-pole
Permission	0.001 ohm to 10 ohm
measurement range	0.020 ohm to 19.99 k ohm
Error	± (2% of reading + 3 digits)
Operation error	± (5% of reading + 3 digits)
Measuring principle: current and voltage measurement
Voltage measurement	Vm = 48V AC
Short circuit current	> 50 mA
Frequency measurement	128 Hz
Probe resistance (R S)	Max 100 kOhm
Auxiliary earth resistance (R H)	Max 100 kOhm
Additional error from R H and RS	R H[kΩ]•••R S[kΩ]/R A[Ω]•••0.2%
R S and R H monitoring with error indicator. Automatic range selection. The measurement is not performed if the current flowing through the current clamp is too low.
R A 4-pole earth resistance measurement (IEC 1557-5)
Switch position	R A 4-pole
Permission	0.001 ohm to 10 ohm
measurement range	0.020 ohm to 19.99 k ohm
Error	± (2% of reading + 3 digits)
Operation error	± (5% of reading + 3 digits)
Measuring principle: current and voltage measurement
Voltage measurement	Vm = 48VAC
Short circuit current	> 50 mA
Frequency measurement	128 Hz
Probe resistance (R S +R ES)	Max 100 kOhm
Auxiliary earth resistance (R H)	Max 100 kOhm
Additional error from R H and RS	R H[kΩ]•••R S[kΩ]/R A[Ω]•••0.2%
R S and R H monitoring with error indicator. Automatic range selection.
RA 3-pole selective earth resistance measurement with current clamp (R A with clamp )
Switch position	R A 3-pole with clamp
Permission	0.001 ohm to 10 ohm
measurement range	0.020 ohm to 19.99 k ohm
Error	± (7% of reading + 3 digits)
Operation error	± (10% of reading + 5 digits)
Measuring principle: current/voltage measurement (with external current clamp)
Voltage measurement	Vm = 48VAC
Short circuit current	> 50mA
Frequency measurement	128 Hz
Probe resistance (R S)	Max 100 kOhm
Auxiliary earth resistance (R H)	Max 100 kOhm
R S and R H monitoring with error indicator. Automatic range selection. The measurement is not performed if the current flowing through the current clamp is too low.
RA 4-pole selective earth resistance measurement with current clamp (R A with clamp )
Switch position	R A 4-pole with clamp
Permission	0.001 ohm to 10 ohm
measurement range	0.020 ohm to 19.99 k ohm
Error	± (7% of reading + 3 digits)
Operation error	± (10% of reading + 5 digits)
Measuring principle: current/voltage measurement (with external current clamp)
Voltage measurement	Vm = 48VAC
Short circuit current	> 50mA
Frequency measurement	128 Hz
Probe resistance (R S)	Max 100 kOhm
Auxiliary earth resistance (R H)	Max 100 kOhm
R S and R H monitoring with error indicator. Automatic range selection. The measurement is not performed if the current flowing through the current clamp is too low.
Electrodeless ground loop measurement (2 clamps)
Switch position	R A 4-pole with 2 clamps
Permission	0.001 ohm to 10 ohm
measurement range	0.020 ohm to 19.99 k ohm
Error	± (7% of reading + 3 digits)
Operation error	± (10% of reading + 5 digits)
Measuring principle: Electrode-free resistance measurement in closed circuits using two current transformers
Voltage measurement	Vm = 48VAC
Frequency measurement	128 Hz
Noise current (I EXT)	Max. I EXT = 10 A (AC) (R A < 20 Ω)
Noise current (I EXT)	Max. I EXT = 2 A (ac) (R A > 20 ohms)
Automatic range selection. Data regarding electrodeless ground loop measurement can only be considered reliable if the measurements were made with the recommended current clamps at the minimum specified distance.