“Emak Group Middle East" LLC - Clamp meter, Fluke 319 - Fluke Казахстан

Article number: 58749158

Clamp meter, Fluke 319 - Fluke

Current clamps The Fluke 317 and 319 are ergonomically designed to fit comfortably in the hand and make it easy to work in tight spaces. This small and rugged clamp meter is ideal for measuring currents up to 1000 A (319) in tight cable spaces. The Fluke 317 and 319 also offer DC and AC current measurement and high resolution for loads below 40 A. In addition to its compact size and impressive feature set, the Fluke 319 also provides inrush current and frequency measurement for testing motors, lighting fixtures, and more. General characteristics Digital display resolution 6000 bits Low battery indicator Low...

от 114 447 ₸

Current clamps

The Fluke 317 and 319 are ergonomically designed to fit comfortably in the hand and make it easy to work in tight spaces. This small and rugged clamp meter is ideal for measuring currents up to 1000 A (319) in tight cable spaces. The Fluke 317 and 319 also offer DC and AC current measurement and high resolution for loads below 40 A. In addition to its compact size and impressive feature set, the Fluke 319 also provides inrush current and frequency measurement for testing motors, lighting fixtures, and more.

General characteristics

Digital display

resolution 6000 bits

Low battery indicator

Nutrition

3 x AAA IEC LR03 batteries

Jaw opening width

37 mm (1.45 in)

Jaw opening width

37 mm (1.45 in)

Dimensions (LengthXWidthXHeight)

234 x 74 x 34.8mm

Weight

384 g (including batteries)

Automatic measurement

Ohm

Degree of protection

	CE
	EN/IEC 61010-1 and IEC 61010-2-032
	Installation type III, operating conditions 600 V

Fluke 319 electrical specifications:

Alternating current

Range selection	40.00A 600.0A 1000A
Permission	0.01 A 0.1 A 1 A
Error	1.6% ±?6 digits (50-60Hz) [40A]
	2.5±8 digits (60-500Hz) [40A]
	1.5%±5 digits (50-60Hz) [600/1000A]
	2.5±5 digits (60-500Hz) [600/1000A]
Crest factor 2% addition to specifications at CF > 2	3.0 max. at 500 A 2.5 max. at 600 A 1.4 max at 1000 A
Reaction to alternating current	rms value

D.C

Range selection	40.00A 600.0A 1000A
Permission	0.01 A 0.1 A 1 A
Error	1.6%±6 digits [40 A]
	1.5%±5 digits [600/1000 A]

AC voltage measurement

Range selection	600.0 V
Permission	0.1 V
Error	1.5%±5 digits (20-500Hz)
Reaction to alternating current	rms value

DC voltage

Range selection	600.0B
Permission	0.1 V
Error	1%±4 digits

Ohm

Range selection	400.0 ohm
	4000 ohm
Permission	0.1 ohm
	1 ohm
Error	1%±5 digits

Integrity

= ? 30 ohm

starting throw

Integration time

100ms

Range selection	5.0 - 500.0 Hz
Permission	0.5%±5 digits
Sweep trigger level	10 - 100 Hz ?? 5 A, 5 - 10 Hz, 100 - 500 Hz? 10 A

All precision measurements refer to a temperature range of 23°C ± 5°C (73°F ± 41°F)
Less than 18°C or more than 28°C (64°F or more than 82°F)

Characteristics of the operating conditions

Working temperature

-10°C to 50°C (14°F to 122°F)

Storage temperature

-40°C to +60°C (-40°F to 140°F)

Permissible humidity during operation

	Non-condensing (< 10 °C) (< 50 °F)
	90% RH (10°C to 30°C) (50°F to 86°F)
	75% RH (30°C to 40°C) (86°F to 104°F)
	45% RH (40°C to 50°C) (104°F to 122°F)
	No condensation

Operating Altitude

Height above sea level 2000 meters

Storage Altitude

Height above sea level 12000 meters

Degree of protection IP

IP40

vibration requirements

Medium MIL-PRF-28800F Class 2, 5-500 Hz, 30 minutes per axis

impact resistance

Electromagnetic Immunity (EMI), Radio Interference Immunity (RFI), Electromagnetic Compatibility (EMC)

Without using the special EMC environment ? 0.1 V/m

Temperature coefficients