“Emak Group Middle East" LLC - Laser distance meter, Fluke 424D - Fluke Казахстан - Instruments for inspection of buildings and structures

Home
Test equipment
Instruments for inspection of buildings and structures
Laser distance meter, Fluke 424D

Article number: 58749169

Laser distance meter, Fluke 424D - Fluke

Laser rangefinder The new Fluke 424D is the most advanced version of the laser distance meter, packed with time-saving features in a wide variety of situations. The available measuring distance is up to 100 meters (330 feet). Large four-line display, built-in compass and 180 degree tilt sensor to measure height. 414D 419D 424D Distance measurement Nominal measurement error[1] ± 2.0 mm[3] ± 1.0 mm [3] Maximum measurement error[2] ± 3.0 mm[3] ± 2.0 mm[3] Distance to reflective plate Leica GZM26 50 m/ 165 ft 80 m / 260 ft 100 m/ 330 ft Typical range [1] 40 m/ 130 ft 80 m / 260 ft 80 m / 260...

от 181 ₸

Laser rangefinder

The new Fluke 424D is the most advanced version of the laser distance meter, packed with time-saving features in a wide variety of situations. The available measuring distance is up to 100 meters (330 feet). Large four-line display, built-in compass and 180 degree tilt sensor to measure height.

414D	419D	424D
Distance measurement
Nominal measurement error[1]	± 2.0 mm[3]	± 1.0 mm [3]
Maximum measurement error[2]	± 3.0 mm[3]	± 2.0 mm[3]
Distance to reflective plate Leica GZM26	50 m/ 165 ft	80 m / 260 ft	100 m/ 330 ft
Typical range [1]	40 m/ 130 ft	80 m / 260 ft	80 m / 260 ft
Range in adverse conditions[4]	35 m/ 115 ft	60 m / 195 ft	60 m / 195 ft
Smallest display unit	1 mm / 1/16 inch	6 /30 / 60 mm (10 / 50 / 100 m)
? laser spot at a distance	6 /30 / 60 mm (10 / 50 / 100 m)	6 /30 / 60 mm (10 / 50 / 100 m)
Tilt measurement
Measurement error by laser beam[5]	No	No	± 0.2°
Measurement error on the body of the device[5]	No	No	± 0.2°
Range	No	No	360°
General information
Laser class	2
Laser type	635 nm, < 1 mW
Protection class	IP40	IP54
Automatic laser shutdown	after 90 seconds
Auto power off	after 180 seconds
Type AAA, 2 x 1.5V NEDA 24A/IEC LR03	Up to 3 000 measurements	Up to 5 000 measurements
Dimensions (H X W X D)	116 mm (L) 53 mm (W) 33 mm (D)	127 mm (L) 56 mm (W) 33 mm (D)	127 mm (L) 56 mm (W) 33 mm (D)
Weight (with batteries)	113	153	158
Temperature range: Storage temperature	-25°C to +70°C (-13°F to +158°F) from 0 °C to +40 °C (from 32°F to +104°F)	-25°C to +70°C (-13°F to +158°F) -10 °C to +50 °C (from 14°F to +122°F)
Calibration cycle	Not applicable	Not applicable	Tilt and compass
Max Height	3000 m	3000 m	3000 m
Permissible relative humidity	85% at 20°F to 120°F ( -7°C to 50°C)	85% at 20°F to 120°F ( -7°C to 50°C)	85% at 20°F to 120°F ( -7°C to 50°C)
Safety	IEC Standard No. 61010-1:2001 EN60825-1:2007 (Class II)
Electromagnetic compatibility	EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010
[1] Compliant at 100% target reflectance (white painted wall), low background light, 25°C. [2] Compliant at 10-500% target reflectance, high background light, temperature range -10°C to +50°C. [3] Uncertainties are observed in the range from 0.05 m to 10 m with an accuracy level of 95%. The maximum error may increase by 0.1 mm/m at distances from 10 m to 30 m and by 0.15 mm/m at distances over 30 m. [4] Compliant at 100% target reflectance and background illumination between 10,000 and 30,000 lux. [5] After user calibration. Additional relative angular deviation of ± 0.01° per degree up to ± 45° in each quadrant. At room temperature. For the entire operating temperature range, the maximum deviation increases by ± 0.1°.