“Emak Group Middle East" LLC - Documenting Calibrator, Fluke 754 - Fluke Казахстан

Home
Test equipment
Calibrators
Documenting Calibrator, Fluke 754

Article number: 58749188

Documenting Calibrator, Fluke 754 - Fluke

Registering calibrator The Fluke 754 Multifunction Documenting Process Calibrator is a powerful, multifunctional documenting calibrator that allows you to download algorithms, lists, and instructions created with software, or send data to your computer for printing, archiving, and research. The 754 features an integrated HART® interface capable of performing nearly all everyday tasks that previously required a separate communicator. Features of the Fluke 754 Calibrator: Changes voltage (V), current (mA), RTD and thermocouple signals, frequency and resistance of sensors of testers, transmitters and other devices Excites/simulates...

от 5 033 752 ₸

Registering calibrator

The Fluke 754 Multifunction Documenting Process Calibrator is a powerful, multifunctional documenting calibrator that allows you to download algorithms, lists, and instructions created with software, or send data to your computer for printing, archiving, and research. The 754 features an integrated HART® interface capable of performing nearly all everyday tasks that previously required a separate communicator.

Features of the Fluke 754 Calibrator:

Changes voltage (V), current (mA), RTD and thermocouple signals, frequency and resistance of sensors of testers, transmitters and other devices
Excites/simulates voltage (V), current (mA), thermocouples, RTD signals, frequency, resistance, and pressure to calibrate transmitters
The power supply of the transducers during the test is carried out using a current loop with simultaneous measurement of the current strength
Measure/generate pressure with any of 29 Fluke 700Pxx modules
Creates and enforces "as-found/as-left" (measured/left) automated procedures to meet quality programs or requirements. Records and documents results
Up to one week saves loaded algorithms and calibration results.
Uses many features such as "autostep" (automatic step setting), settable unit, user input of values during the test, check of one and two-position switches, check of the square root value of differential pressure flow sensors, programmable measurement delay, etc. .
Easy to use
Three years warranty
Bright double white display. Simultaneously reads output and measured parameters.
Multilingual interface
Li-Ion battery for 10 hours of continuous use. Includes gas pressure gauge.
Work with short-pulse RTD transmitters and controllers with pulse length up to 1 ms.
Comes with demo version of DPC/Track software.
Compatible with many Asset Management software packages.

HART Capabilities

The Fluke 754 Multifunction Documenting Process Calibrator is designed to handle virtually all everyday tasks that would normally require a separate accessory device to connect to a separate communicator. In fact, it has the transmission capabilities of the Model 375 HART Communicator.

Requires no external box or second instrument for daily HART calibration and maintenance.
Has fast HART communication.
Supports popular HART transmitters with more device specific commands than any other HART calibrator.
Works with a group of master devices, in batch mode and with multipoint configuration.
Easily upgradeable as additional instruments are added and new HART versions are released.
Polls to determine device type, manufacturer, model, tags.
Reconfigures the configuration of the sensor distribution map for temperature sensors with two sensors.
Reads the basic HART PV variables and the output digital signal of the smart transmitter when measuring the analog current (mA) output.
Reads and writes HART configuration functions for field adjustment of PV ID tags, damping, and other top-level configuration settings.
Renames smart transmitters by reading and writing HART ID tags.

Accuracy of measurements
Constant pressure		Range	1 year	2 years
		100,000 mV	0.02% + 0.005 mV	0.03% + 0.005 mV
		3.00000 V	0.02% + 0.00005 V	0.03% + 0.00005 V
		300000 V	0.02% + +0.0005 V	0.03% + 0.0005 V
		300.00 V	0.05% + +0.05 V	0.07% + 0.05V
AC voltage	Range	Permission	1 year	2 years
	40 - 500 Hz	Permission	1 year	2 years
	3,000 V	0.001 V	0.5% + 0.002 V	1.0% + 0.004 V
	30.00 V	0.01V	0.5% + 0.02V	1.0% + 0.04V
	300.0 V	0.1 Hz	0.5% + 0.2V	1.0% + 0.2V
D.C		Range	1 year	2 years
		30,000 mA	0.01% + 5uA	0.015% + 7uA
		110.00 mA	0.01% + 20uA	0.015% + 30uA
Resistance		Range	1 year	2 years
		10,000 ohm	0.05% + 50mΩ	0.07% + 70mΩ
		100.00 ohm	0.05% + 50mΩ	0.07% + 70mΩ
		1.0000 kΩ	0.05% + 500mΩ	0.07% + 0.5 ohm
		10,000 kOhm	0.1% + 10 ohm	0.15% + +15 ohm
Frequency		Range	Permission	Accuracy (2 years)
		1.00 Hz to 110.00 Hz	0.01V	0.05 Hz
		110.1 Hz to 1100.0 Hz	0.1 Hz	0.5 Hz
		1.101 to 11.000 kHz	0.001 V	0.005 kHz
		11.01 to 50.00 kHz	0.01 V	0.05 Hz
Simulation Accuracy (Excitation)
Constant pressure		Range	1 year	2 years
		100,000 mV	0.01% + 0.005 mV	0.015% + 0.005 mV
		1.00000 V	0.01% + 0.00005 V	0.015% + +0.0005V
		15.0000 V	0.01% + +0.0005V	0.015% + +0.0005 V
D.C		Range	1 year	2 years
		22,000 mA (Excitation)	0.01% + 0.003 mA	0.02% + 0.003 mA
		Current load (simulation)	0.02% + 0.007 mA	0.04% + 0.007 mA
Resistance		Range	1 year	2 years
		10,000 ohm	0.01% + 10mΩ	0.015% + 15mΩ
		100.00 ohm	0.01% + 20mΩ	0.015% + 30mΩ
		1.0000 kΩ	0.02% + 0.2 ohm	0.03% + 0.3 ohm
		10,000 kOhm	0.02% + 3 ohm	0.03% + 5 ohm
Frequency			Range	2 years
			0.1 Hz to 10.99 Hz	0.01 V
			0.01 Hz to 10.99 Hz	0.01V
			11.00 to 109.99 Hz	0.1 Hz
			110.0 to 1099.9 Hz	0.1 Hz
			1.100 to 21.999 kHz	0.002 kHz
			22.000 - 50.000 kHz	0.005 kHz
Technical data
Data recording and output functions			Measurement functions:	Voltage, current, resistance, frequency, temperature, pressure
			Reading speed:	1, 2, 5, 10, 20, 30, or 60 readings/minute
			Maximum record length:	8000 readings (7980 for 30 or 60 readings/minute)
Ramp functions			Excitation functions:	Voltage, current, resistance, frequency, temperature
			Speed:	4 steps/second
			Route definition:	Continuity and Voltage (Continuity detection is not possible with current excitation)
Loop power function			Voltage:	Selectable, 26V
			Accuracy:	10%, 18V minimum at 22mA
			Maximum current:	25 mA, short circuit protected
			Maximum input voltage:	50 VDC
Pitch Functions			Excitation functions	Voltage, current, resistance, frequency, temperature
			Manual steps	Selectable steps, change with arrow buttons
			"Autostep" function (automatic step setting)	Fully programmable functions, trigger delay, step value, step time, repeat
Mechanical and general characteristics
Dimensions			136 x 245 x 63 mm
Weight			1.2 kg
Batteries			Built-in rechargeable Li-ion battery: 7.2V, 4400mAh, 30Wh
Battery life			usually >8 hours
Replacing batteries			Replace without opening the calibrator; no tools required.
Side Port Connections			Pressure module connector USB connector for connecting to your computer Digital instrument connector (HART) Connection for optional charger/rectifier
Data storage capacity			1 week results of calibration procedures
Specifications for 90 days			The standard specification interval for the 750 series is 1 and 2 years. Typical, over 90 days, measurements and excitation accuracy can be assessed if Divide the "% Read" or "% Output" data obtained during one year by 2. Minimum data displayed as "% of full value" or "counts" or "ohms" remain unchanged.