Русский
Fluke 789 Calibrator Kit - Fluke
Multimeter calibrator Purpose of the Fluke 789 Process Multimeter Calibrator: The Fluke 780 Series Process Multimeters combine two of the most commonly used tools by any technician. They are a combination of a digital multimeter and a current loop calibrator in one solid, rugged and portable instrument. The base model for these instruments was the Fluke 85 multimeter, from which they inherited their high measurement accuracy. The newest model in this series is the Fluke 789 ProcessMeter™. Thanks to the built-in 24V current loop generator, technicians do not need a separate power source when performing stand-alone testing of...Multimeter calibrator
Purpose of the Fluke 789 Process Multimeter Calibrator:
The Fluke 780 Series Process Multimeters combine two of the most commonly used tools by any technician. They are a combination of a digital multimeter and a current loop calibrator in one solid, rugged and portable instrument.
The base model for these instruments was the Fluke 85 multimeter, from which they inherited their high measurement accuracy.
The newest model in this series is the Fluke 789 ProcessMeter™. Thanks to the built-in 24V current loop generator, technicians do not need a separate power source when performing stand-alone testing of sensors and transmitters.
Safety Compliance:
All entries are protected according to EN61010-1 CAT III 1000 V, CSA, UL and TUV.
Features of the Fluke 789 Process Calibrator:
| Options | Fluke 789 |
| Digital multimeter and loop calibrator in one tool | + |
| Digital True RMS Multimeter 1000 volts, 440 milliamps | + |
| DC source and loop calibrator | + |
| 24 V loop supply | + |
| Operation modes Max/Min/Average/Capture/Relative | + |
| Diode and open circuit test beep | + |
| Manual (100%, 25%, Coarse Fine) plus Auto. floating and stupas. per. out. signal | + |
| Simultaneous display of data in milliamps and in % | + |
| Battery/fuses with outside access | +/+ |
| HART mode with loop power and built-in 250 ohm resistor | + |
| 0% and 100% pushbuttons to switch between 4 and 20mA current generation for quick range checks | + |
Specifications for the Fluke 789:
Parameter Fluke 789 Voltage measurement Range 0-1000 V DC or AC Permission 0.1 mV to 1.0 V Accuracy 0.1% value + 1 unit (volt DC) Current measurement Range 0-1 A
0-30 mAPermission 1mA
0.001 mAAccuracy 0.2%+2 units
0.05%+2 unitsCurrent generation Range 0-20mA or 4-24mA Accuracy 0.05% reading Other specifications Maximum load 1200 ohm Power loop power 24 V Resistance Up to 40 MΩ,
0.2%+1 unitsFrequency Up to 19.999 kHz,
0.005%+ 1 unitCircuit integrity Beep < 100 ohm Range check Yes Battery life Typically 140 hours, 10 hours when generating 12 mA Dimensions 203mm x 100mm x 50mm Weight 600 g
Product code 58749191
brand Fluke
State Новое
Manufacturer country США
