“Emak Group Middle East" LLC - Vibration Meter, Fluke 810 - Fluke Казахстан - Instruments for inspection of buildings and structures

Home
Test equipment
Instruments for inspection of buildings and structures
Vibration Meter, Fluke 810

Article number: 58749193

Vibration Meter, Fluke 810 - Fluke

Vibrometer The Fluke 810 Handheld Vibrometer is designed to measure and monitor the vibration level of rotating equipment with built-in diagnostics and common troubleshooting capabilities with automatic defect prediction. The device has an intuitive interface and requires a minimum of knowledge in vibration diagnostics to use it. When measuring, the vibrometer reports, using a color indicator, the corresponding state of the controlled unit and, upon completion of the measurements, issues a report on the current vibration level from good to emergency, and can also identify four types of main faults: bearing defect, misalignment, loose...

от 5 ₸

Vibrometer

The Fluke 810 Handheld Vibrometer is designed to measure and monitor the vibration level of rotating equipment with built-in diagnostics and common troubleshooting capabilities with automatic defect prediction. The device has an intuitive interface and requires a minimum of knowledge in vibration diagnostics to use it. When measuring, the vibrometer reports, using a color indicator, the corresponding state of the controlled unit and, upon completion of the measurements, issues a report on the current vibration level from good to emergency, and can also identify four types of main faults: bearing defect, misalignment, loose fastenings, imbalance. The Fluke 810 Vibration Analyzer comes with a 3-axis vibration sensor that can significantly reduce measurement time compared to single-axis accelerometers. The package includes PC software with a spectrum plotting function, which allows an experienced diagnostician to identify other problems that the vibrometer cannot automatically diagnose.

The Fluke 810 vibration analyzer is included in the state register of measuring instruments under No. 59548-14

Fluke 810 Features:

Built-in diagnostics and identification of the four most common mechanical problems: defective bearings, loose fittings, misalignment, imbalance, and other (non-standard) faults.
Fault scale with four levels of severity: Minor, Medium, Severe and Critical
Top repair advice
Additional diagnostic information includes recorded peaks and vibration spectra
Context help
2 GB built-in memory, expandable.
Data export function (via USB connection) for more detailed analysis
Self test function
Laser tachometer for accurate measurement of machine operating speed
Triaxial accelerometer with TEDS technology, 100 mV/g
Data storage and results tracking with included Viewer software

Specifications Fluke 810:

frequency range	2 to 20000 Hz
ADC	24 bit
Sampling frequency	Up to 50 kHz
Number of spectrum lines	800 lines
Dynamic Range	128 dB
Signal to noise ratio	100 dB
vibration sensor	three-axis accelerometer 100 mV/g, up to 80g frequency range: along the Z axis from 2 to 7000 Hz along the X, Y axis from 5 to 5000 Hz; power supply IEPE from 18 to 30V; vibration peak 500g, shock 5000g; operating temperature from -50 to +120 °C; fastening on a hairpin or magnet;
Diagnostics of standard defects	Bearing defect, imbalance, misalignment, soft foot
Tachometer	laser, range from 6 to 100,000 rpm resolution 0.1 rpm accuracy ±0.05% effective distance up to 1 meter weight 95 g dimensions 122x28 mm;
Display	TFT LCD, 5.7", 320x240, with backlight
PC communication interface	mini usb
Platform	WinCE 6.0
Power supply	Li-Ion battery, 2.55 Ah, continuous operation up to 8 hours
Operating temperature	0 to 50°C
Storage temperature	-20 to +60°C
Dimensions	268x70x186 mm
Weight	around 1900