“Emak Group Middle East" LLC - Digital multimeter, Fluke 87V - Fluke Казахстан

Home
Test equipment
Electrical measuring instruments
Digital multimeter, Fluke 87V

Article number: 58749196

Digital multimeter, Fluke 87V - Fluke

Digital multimeter Accuracy and diagnostic features for maximum industrial performance The new Fluke 87 V-Series and 83 V-Series offer improved measurement performance, troubleshooting capabilities, increased accuracy and resolution to solve more problems in motor drives, industrial automation, power distribution systems and electro-mechanical equipment. The 80 Series V models are very similar in function to the classic 80 Series models, but with greater problem-solving capability, safety, convenience and impact protection. The new 80 Series V instruments have been independently tested to ANSI/ISA S82.01 2nd edition and EN61010-1...

от 446 978 ₸

Digital multimeter

Accuracy and diagnostic features for maximum industrial performance

The new Fluke 87 V-Series and 83 V-Series offer improved measurement performance, troubleshooting capabilities, increased accuracy and resolution to solve more problems in motor drives, industrial automation, power distribution systems and electro-mechanical equipment.

The 80 Series V models are very similar in function to the classic 80 Series models, but with greater problem-solving capability, safety, convenience and impact protection.

The new 80 Series V instruments have been independently tested to ANSI/ISA S82.01 2nd edition and EN61010-1 CAT IV 600V/CAT III 1000V standards. They can withstand surges up to 8,000 V and reduce the risks associated with surges and surges.

electrical safety
All inputs are protected to ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand surges up to 8,000 V and reduce the risk of surges and surges.

Proper Measurement of Pulse Width Modulated Drive Signals
Until now, there has not been a multimeter capable of accurately measuring variable speed drives. And the new Fluke 87V is designed specifically for these complex signals. Think about the potential productivity you can get by eliminating the guesswork when troubleshooting a drive system. Every measurement is correct at every point in time.

Unique function to accurately measure the AC voltage of high-noise pulse-width modulation signals. Accurate measurement of variable speed drives and motor contacts
Accurate measurement of frequency (motor speed). Frequency measurement accuracy is not affected by the carrier frequency of the variable speed drive
Measure AC current with optional current clamp
Compare with 87V screen reading when measured on a variable speed drive
A special device blocks the strong high-frequency noise produced by powerful electric drive systems.

Characteristics

DC voltage

Max Voltage:	1000 V
Error:	Fluke 83V: ±(0.1%+1)
	Fluke 87V: ±(0.05%+1)
Maximum resolution:	Fluke 83V: 100µV
	Fluke 87V: 10µV

AC voltage

Max Voltage:	1000 V
Error:	Fluke 83V: ±(0.5%+2)
	Fluke 87V: ±(0.7%+2) True RMS
AC bandwidth	Fluke 83 V: 5 kHz
	Fluke 87 V: 20 kHz*
	*with low pass filter; 3 dB @ 1 kHz
Maximum resolution:	0.1 mV

DC power

Maximum current:	10 A (20 A for 30 seconds maximum)
Current measurement error:	Fluke 83V: ±(0.4%+2)
	Fluke 87V: ±(0.2%+2)
Maximum resolution:	Fluke 83V: 0.01 mA
	Fluke 87 V: 0.01 µA

Alternating current

Maximum current:	10 A (20 A for 30 seconds maximum)
Current measurement error:	Fluke 83V: ±(1.2%+2)
	Fluke 87 V: ±(1.0%+2) True RMS
Maximum resolution:	0.1 uA

Resistance

Maximum resistance:	50M??
Error:	Fluke 83V: ±(0.4%+1)
	Fluke 87V: ±(0.2%+1)
Maximum resolution:	0.1??

Capacity

Maximum capacity	9.999uF
Error	±(1%+2)
Maximum Resolution	0.01 nF

Frequency

Maximum frequency	200 kHz
Error	±(0.005%+1)
Maximum Resolution	0.01 Hz

Fill factor

Fill factor	0.999
Error	±(0.2% per kHz +0.1%)
Maximum Resolution	0.001

Temperature measurements

Fluke 83 V, 87 V/E:	-200.0°C - 1090°C
	-328.0°F - 1994.0°F
	sensors are supplied separately

Temperature probe 80 BK

	-40.0°C - 260°C
	-40.0°F - 500°F, 2.2°C or 2% whichever is greater

electrical conductivity

Maximum electrical conductivity	60.00 nS
Error	±(1.0%+10)
Maximum Resolution	0.01 nS

Diode testing

	Range 3V
Permission:	1 mV
Error:	±(2% + 1)

Fill factor range

Error:

±(0.2% per kHz +0.1%)

Environmental conditions

Working temperature

-20°C to +55°C

Storage temperature

-40°C to +60°C

Humidity (non-condensing)

	0% - 90% (0°C - 35°C)
	0% - 70% (35°C - 55°C)

Operating Altitude

2000 m

General safety features

Over voltage category

from EN 61010-1 up to 1000V CAT III, 600V CAT IV

Approvals received

UL, CSA, T?V, VDE Listed

Mechanical and general characteristics

Size

201 x 98 x 52 mm (with case)

Weight

355 g

Weight with case and flexible holder

624 g

Display

Digital:	6000 samples with an update rate of 4 samples/sec.
	(Model 87 also has 19999 counts in high resolution mode)
Analog:	32 segments, update rate 40 samples/sec
Frequency:	19,999 samples, update rate 3 samples/sec @ > 10 Hz.

Guarantee

Lifetime

Battery life

Alkaline:

Typically about 400 hours without backlight.

blows

Drop from a height of one meter, which complies with IEC 61010-1:2001

Vibration

According to MIL-PRF-28800 for Class 2 instruments

Product code 58749196

brand Fluke

State Новое