Battery Analyzer, Fluke BT508 - Fluke
Battery analyzer The Fluke BT508 Battery Analyzer is designed for on-line testing of stationary batteries used in backup power systems. The tester allows you to control the internal resistance of each element in the battery and measure the voltage, saving the results in the internal memory. The recorded data is stamped with the time and date of the measurement and can be exported to a PC for further analysis and reporting. The use of the Fluke BT508 ensures fast checks. It takes no more than 3 seconds to test the internal resistance of one battery, while the actual voltage at its outputs is also monitored. The voltage and resistance...Battery analyzer
The Fluke BT508 Battery Analyzer is designed for on-line testing of stationary batteries used in backup power systems. The tester allows you to control the internal resistance of each element in the battery and measure the voltage, saving the results in the internal memory. The recorded data is stamped with the time and date of the measurement and can be exported to a PC for further analysis and reporting.
The use of the Fluke BT508 ensures fast checks. It takes no more than 3 seconds to test the internal resistance of one battery, while the actual voltage at its outputs is also monitored. The voltage and resistance readings are displayed on the LCD simultaneously in different lines. By comparing the result with the calculated nominal value, you can immediately judge the technical condition of the tested battery.
High accuracy of resistance determination is achieved due to the four-wire circuit and the special design of probes with a movable tip. During the measurement process, you can find out if the battery is damaged by a special indicator. To reduce the effect of ripple voltage on measurement accuracy, the Fluke BT508 has a plug-in internal frequency filter.
An additional operating mode allows you to measure DC voltage. This makes it possible to measure at the test points of power systems, for example, at the battery outlet or at the contacts of the rectifier of the charging system. You can save the results obtained at the touch of a button, without interrupting the measurement process.
An important advantage of the Fluke BT508 Battery Analyzer is the ability to set acceptable thresholds for the parameters being tested. Thus, the device immediately displays the results in the form of text messages Pass / Fail / Warning - Pass / Fail / At the threshold state. You can use the power quality analyzer for tolerance control even without special skills.
When testing batteries of different types, you do not have to reconfigure the analyzer. The device provides the ability to set 10 threshold indicators, so it is enough to select the desired set of threshold values. Buying a Fluke BT508 battery analyzer will be a good solution for monitoring the performance of stationary power sources, including UPS, emergency batteries, etc.
Fluke-BT508 | |||
---|---|---|---|
Main functions | |||
Functions | Range | Permission | Error |
Battery resistance1 | 3 mΩ | 0.001 mΩ | 1% + 8 |
30 mΩ | 0.01 mΩ | 0.8% + 6 | |
300 mΩ | 0.1 mΩ | 0.8% + 6 | |
3000 mΩ | 1 mΩ | 0.8% + 6 | |
In post. current | 6 V | 0.001 V | 0.09% + 5 |
60B | 0.01V | 0.09% + 5 | |
600 V | 0.1V | 0.09% + 5 | |
Main functions | |||
Measurement mode | 999 records per measurement position with time stamp | ||
Cyclic mode | Up to 100 profiles and 100 profile templates (each profile stores up to 450 batteries) with timestamp | ||
General characteristics | |||
Dimensions (H x W x D) | 22 cm x 10.3 cm x 5.8 cm (9 in. x 4 in. x 2 in.) | ||
Weight | 850 g / 1.9 lb | ||
Screen size | 7.7 cm x 5.6 cm (3 in. x 2.2 in.) | ||
Interface | mini usb | ||
Guarantee | 3 years | ||
Protection class | IP IP40 | ||
Electrical safety class | 600 V CAT III | ||
Working temperature | 0°C to 40°C | ||
1 The measurement is based on the method of administration of the lane. current. Input signal < 100 mA, 1 kHz. |
Product code 58749204
brand Fluke
State Новое
Manufacturer country США