Русский
Article number:
73216540
HN, HN-25, HF, HX1, HN-CS4 crimpstar mechanical tool for non-insulated ferrules - CEMBRE
HN, HN-25, HF, HX1, HN-CS4 crimpstar mechanical tool for non-insulated ferrules compact and easy to use. Characteristics: - crimping jaws made of heat-treated steel, which guarantees high strength - prefabricated ratchet for adjusting crimping (automatic opening at the end of crimping) - emergency release lever to open the crimping jaws until they are completely closed (if necessary) - ergonomic handles made of molded, non-slip plastic Tool crimps: • uninsulated lugs and connectors: - HN1: for conductors 0.25-10 mm?; - HN5: for conductors 10-16 mm?. • uninsulated lugs and connectors of AM, LM, LP series: - HN-A25:...
HN, HN-25, HF, HX1, HN-CS4 crimpstar mechanical tool for non-insulated ferrules
compact and easy to use.
Characteristics:
- crimping jaws made of heat-treated steel, which guarantees high strength
- prefabricated ratchet for adjusting crimping (automatic opening at the end of crimping)
- emergency release lever to open the crimping jaws until they are completely closed (if necessary)
- ergonomic handles made of molded, non-slip plastic
Tool crimps:
• uninsulated lugs and connectors:
- HN1: for conductors 0.25-10 mm?;
- HN5: for conductors 10-16 mm?.
• uninsulated lugs and connectors of AM, LM, LP series:
- HN-A25: for conductors with a cross section of 10-25 mm?;
• copper pipe lugs DR (DIN 46235) and end-to-end connecting sleeves DSV (DIN 46267);
- HN-D25 for conductors with a cross section of 10-25 mm?.
• copper pipe lugs HR and end-to-end connecting sleeves HSV;
- HN-H25: for 10 and 25 mm² conductors.
• brass clamps with open sleeve:
- HF1: for conductors with a cross section of 0.5-4 mm? (not BN-FAB/FAR);
- HF2: for conductors with a cross section of 0.08-1.3 mm?;
- HNKE16: for 4-16 mm² conductors.
- HX1: coaxial connectors RG58, RG59, RG62, RG71;
- HN-CS4: Cembre CS4 connectors for 2.5-4-6mm² conductors.
compact and easy to use.
Characteristics:
- crimping jaws made of heat-treated steel, which guarantees high strength
- prefabricated ratchet for adjusting crimping (automatic opening at the end of crimping)
- emergency release lever to open the crimping jaws until they are completely closed (if necessary)
- ergonomic handles made of molded, non-slip plastic
Tool crimps:
• uninsulated lugs and connectors:
- HN1: for conductors 0.25-10 mm?;
- HN5: for conductors 10-16 mm?.
• uninsulated lugs and connectors of AM, LM, LP series:
- HN-A25: for conductors with a cross section of 10-25 mm?;
• copper pipe lugs DR (DIN 46235) and end-to-end connecting sleeves DSV (DIN 46267);
- HN-D25 for conductors with a cross section of 10-25 mm?.
• copper pipe lugs HR and end-to-end connecting sleeves HSV;
- HN-H25: for 10 and 25 mm² conductors.
• brass clamps with open sleeve:
- HF1: for conductors with a cross section of 0.5-4 mm? (not BN-FAB/FAR);
- HF2: for conductors with a cross section of 0.08-1.3 mm?;
- HNKE16: for 4-16 mm² conductors.
- HX1: coaxial connectors RG58, RG59, RG62, RG71;
- HN-CS4: Cembre CS4 connectors for 2.5-4-6mm² conductors.
Product code 73216540
brand Сembre
