“Emak Group Middle East" LLC - PD-TaD 80 Portable PD diagnostic system - BAUR Казахстан

Home
Devices for detecting faults and diagnosing cables
Devices for diagnostics of cable lines
PD-TaD 80 Portable PD diagnostic system

Article number: ENRGSKN-214

PD-TaD 80 Portable PD diagnostic system - BAUR

The portable system PD-TaD 80 in combination with high-voltage VLF (VLF) units from BAUR is used for diagnosing cable lines by measuring and localizing partial discharges.

The portable diagnostic system PD-TaD 80 in combination with high-voltage VLF systems from BAUR is intended for:

diagnostics of cable lines by measuring and localizing partial discharges in cable insulation, couplings and end sleeves;
diagnostics of cable lines by measuring partial discharges during high-voltage tests with alternating voltage with a frequency of 0.1 Hz (VLF)
diagnostics of cable lines by simultaneous measurement of partial discharges and dielectric loss tangent;
complex MWT test: 0.1 Hz alternating voltage testing (VLF) with simultaneous measurement of partial discharges and dielectric loss factor

Diagnostics by measuring the dielectric loss tangent of cables allows you to quickly and reliably assess aging and deterioration of cable insulation. The installation contains testing methods in accordance with the latest foreign standards, allowing this diagnostic to be carried out automatically with the issuance of a clear and complete test report.

Diagnostics of cable lines using the method of measuring and localizing partial discharges allows not only to assess the condition of the insulation, but also to directly find the location of the deterioration of the insulation.

The combination of the two methods described above makes it possible to detect hidden defects (for example, if there is water in the cable sleeve) and is the most reliable and effective way to prevent damage to cable lines and maintain cable records for the purpose of planning repairs and replacements.

Using the MWT (Full Monitored Withstand Test) mode allows you to reduce cable testing time by simultaneously measuring loss tangent and/or partial discharges, thereby reducing the time stress on the cable with increased voltage. Also, complex tests significantly reduce the time for testing and diagnosing a cable line when compared with individual tests using three methods.

Functional features of PD-TaD 80:

Compliance with foreign and domestic standards in the field of partial discharge measurement (GOST R 55191-2012 / IEC 60270:2000)
Lightweight (21 kg) and compact system
High accuracy and sensitivity of PD measurement
Availability of an integrated filter and other interference suppression systems
Ease of operation during measurements and automation of protocol issuance

Technical characteristics of PD-TaD 80:

High voltage communication unit:
Input voltage	57 kV (rms) / 80 kV (peak)
Coupling capacitor capacity	8 nF
PD detector:
Power supply and data transmission	via Power Box power supply (Power over Ethernet technology)
Signal Boost	0–75 dB
Type of protection	IP54
Dimensions (W x H x D) - including high-pass filter	approx. 410 x 593 x 369 mm approx. 410 x 798 x 369 mm
Weight	approx. 21 kg
including high pass filter	approx. 21.5 kg
Calibrator
Electric charge (pulses) - CAL1B - CAL1E	0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 nC 0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 nC
Nutrition	Crown battery 9 V, DIN/IEC 6F22
BAUR system software
User interface	in 23 languages
For detailed information, see the BAUR system software data sheet (for PD measurement)
Localization of partial discharges
Theoretical measuring range	10–12,800 m (at v/2 = 80 m/µs)
Signal propagation speed	50–120 m/µs
Sampling frequency	100 Msamples/s (10 ns)
PD measurement range	1 pC – 100 nC
Accuracy	approx. 1% cable length
Permission	0.1 pC / 0.1 m

Dielectric loss factor and MWT measurements
Automatic registration and compensation of leakage currents	integrated
Control of the measurement process	using VLF generator BAUR Frida TD, Viola TD, PHG TD
Laptop
CPU	Intel Core i5
operating system	Windows 7 Ultimate 32-bit (or higher)
RAM	at least 4 GB
HDD	at least 256 GB, SSD
Total information
Ambient temperature (operating)	-10 to +50 °C
Storage temperature	-20 to +60 °C
Rel. air humidity	without condensate drainage
Safety and EMC	Complies with EU Low Voltage Directive (CE mark) (2014/35/EU) and the Electromagnetic Compatibility Directive (2014/30/EU), as well as the standard “External influence tests” EN 60068-2 et seq.
Transport Case: Weight and Dimensions (W x H x D)
Transport case 1 with PD-TaD 80 system	approx. 42 kg; 800 x 581 x 482 mm
Transport case 2 for accessories	approx. 22.5 kg; 627 x 497 x 303 mm