“Emak Group Middle East" LLC - SCAN-1ME Mobile cable electrical laboratory based on GAZ-2705 - GC "Energoscan" Казахстан

Home
Mobile laboratories
Mobile electrical laboratories
SCAN-1ME Mobile cable electrical laboratory based on GAZ-2705

Article number: ENRGSKN-191

SCAN-1ME Mobile cable electrical laboratory based on GAZ-2705 - GC "Energoscan"

The mobile cable electrical laboratory SCAN-1ME, based on the GAZ-2705, is designed for high-voltage testing, determining the location of damage to cable lines with voltages of 0.4-10 kV. Non-burning methods of preliminary OMP (ARC, ICM, DECAY), burning, precise OMP of cables using acoustic and induction methods, route determination, selection of cable from a bundle, search for sheath damage.

The mobile cable electrical laboratory SCAN-1ME, based on the GAZ-2705, is designed for high-voltage testing, determining the location of damage to cable lines with voltages of 0.4-10 kV.

The cable laboratory SCAN-1ME is a replacement for: ETL-10, KAEL-3, KAEL-5, Angstrem-1, LK-1, LVI HVT, PPU-1, PPU-2, SURA-1, SURA-2, transcable BAUR, PVL-10, etc.

Capabilities of the SCAN-1ME electrical laboratory:

Testing of power cable lines and substation equipment with alternating voltage of industrial frequency 50 Hz up to 50 kV, rectified voltage up to 70 kV.
Insulation resistance measurement, voltage up to 2.5 kV;
Preliminary location of cable damage using the following methods:
- TDR reflectometry method;
- Arc pulse method (ARC);
- Current-coupled oscillatory discharge (ICE) method;
- Voltage-coupled oscillatory discharge method (Decay);
- Burning/afterburning of insulation;
Accurate location of cable line damage
- Acoustic method;
- Induction;
- Potential
Determination of the cable line route;
Determining the depth of the cable line;
Selecting a cable from a bundle;
Determining the location of cable sheath damage.

Laboratory equipment is conventionally divided into main (mounted) and additional (non-mounted) equipment. The laboratory has a modular structure; instruments, if necessary, operate independently of each other.

Additionally, the laboratory can be supplied with:

High-voltage VLF installation VIU SNC-36 (or equivalent);
Locator kit CST-15 (or equivalent);
Search kit CSL-10 (or equivalent);
Instruments for cable diagnostics;

Laboratory production time: 60-70 days

Delivery terms: pick up

Payment terms: 50% advance payment, remaining 50% upon ETL readiness for shipment.

Advantages of working with Energoscan electrical laboratories:

Affordable ETL price (set from 5 million rubles);
Reliability of ETL (In-house production, warranty from 12 to 24 months. Further extension of the warranty after maintenance);
Convenience of working with ETL (Simple and intuitive control of ETL. All devices operate autonomously from each other. Modular design.)
Technical support and service (Training of the Customer’s specialists according to DPO programs, Technical consultations of specialists 10/5, Service and repair of ETL in a short time, replacement stock of devices)
Experience of Energoscan (On the market since 2012, We provide ETL services up to 500 kV, we use foreign and domestic developments)

Counter table	The supporting structure is used to accommodate modules and blocks. It is also the operator's workplace. Stand type: Eurodesk. The rack is made in a 19-inch design with the ability to install equipment designed for installation in a 19-inch format. Additionally, the Eurodesk stand functions as a desktop.
Control and safety units	Control block; Network block; SCAN-1 low-voltage connection block; Connection block with discharge and grounding device; System operative power supply device; Circuit breaker block; Ground control unit; Isolation transformer; Semi-automatic switching system (1F); Security and alarm system.
High Voltage Test Facility VIU-70/50	Rated supply voltage, 220V Maximum voltage (50 Hz) - 50 kV Maximum rectified voltage – 70 kV Installation power – from 3 kVA Measurement error - 3%
High voltage pulse generator GVI-32/2000	Rated supply voltage - 220V Maximum power consumption – 3.5 kVA Maximum voltage – 32 kV Number of stages – 3 (8,16,32 kV) Maximum stored energy - 2000 J Pulse repetition periods – 3 and 6 seconds, single
Communication blocks	BLOCK ID-40 (Pulse-arc method, ARC) BLOCK DN-80 (Voltage oscillatory discharge method, DECAY) BLOCK DT-50 (Oscillating current discharge method, ICM)
Burning installation PU-90	Power - 220(+-10%)/ 45-60Hz Maximum power consumption – 5.75 kVA Maximum voltage - 15 kV DC; Maximum current – 90A Number of steps – 8 pcs. Steps: AC, 60V/92A step (110A max) alternating current, stage 230 V / 23 A AC, stage 500 V / 11 A AC, stage 1500 V / 3.5 A alternating current, stage 2 600 V / 2 A DC, stage 5,000 V / 1 A DC, stage 8,500 V / 0.65 A DC, stage 15,000 V / 0.35 A
Reflectometer FLIGHT-305	Distance ranges – from 0 to 51 km Pulse voltage – from 7V to 25V Sampling frequency - 200 MHz Internal memory – 500 reflectograms; Supported methods: Reflectometry (TDR); Arc Pulse (ARC); Oscillatory current discharge (ICM); Oscillatory voltage discharge (DECAY).
Induction search kit PC-2500	Stationary generator: Frequencies: 1024/2048 (Hz) Exit power – 2500 W Max. exit current – 50 A Portable generator: Frequencies: 273/2187.5/6562.5/26250 (Hz) Exit power – 10 W Receiver: Frequencies: 273/1024/2048/2187.5/6562.5/26250Hz The maximum detectable depth of the route is 6m Depth determination accuracy1 ±5%+10 cm Finding accuracy 10cm Operating time from battery – 20 hours Receiver weight – 0.65 kg Included: Acoustic sensor; Contact pins; Pliers for identifying “your” cable.
Cable drum and cable system	The system is made in the form of cable drums on a steel frame with a braking device. The system includes the following cable reels: Drum with high-voltage shielded cable for testing with rectified voltage up to 70 kV – 3x30 m; Drum with network cable – 30m; Drum with working grounding cable 10mm2 –30m; Drum with protective grounding cable 16mm2 with current collection clips) – 30m; Drum with wire for testing with alternating voltage of industrial frequency - 30 m (installed on a dielectric stand, with the ability to test without completely unwinding the wire);
Optional equipment	PPE set: Helmets - 2 pcs., gloves - 2 pairs, boots - 2 pairs, dielectric mat - 1 pc., voltage indicator up to 1 kV - 1 pc., voltage indicator up to 35 kV - 1 pc., ШО10 - 1 pc., ШО35 - 1 pc.) ; Megaohmmeter E6-32; Curvimeter (road wheel); Racks for hanging cables - 5 pcs.;