All products
Product catalog
Sort by:
MHT 410 System for analysis of dissolved gases and moisture in transformer oil
The MHT 410 monitoring system allows continuous monitoring of moisture and dissolved hydrogen in transformer oil.
Gas analyzer Vaisala OptimusTM OPT100 DGA for transformers
The Vaisala Optimus OPT100 DGA Gas Analyzer delivers high performance, zero false alarms and the best long-term measurement stability of any device on...
TFS 2100 Overhead line monitoring system
TFS 2100 is designed to determine the location of faults in overhead power transmission lines using the wave method. Estimated accuracy of the method is...
CAM-5 – IntelliSAW Medium Voltage Equipment Monitoring System
The CAM-5 central module, part of the IntelliSAW continuous monitoring system for medium voltage equipment, is designed for collecting, processing and...
iNFC temperature sensor low voltage
Wireless (with the possibility of wired data transmission) temperature sensor with “iNFC” technology included in the IntelliSAW continuous monitoring...
Low Profile SAW Temperature Sensor
Wireless temperature sensor with “SAW” technology included in the IntelliSAW continuous monitoring system for medium voltage equipment.
AIR INTERFACES TMP – Information acquisition module (radio interface) with SAW temperature sensors
The AIR INTERFACES TMP information acquisition module, part of the IntelliSAW system for continuous monitoring of the condition of medium voltage...
IRM READER – IntelliSAW Medium Voltage Monitoring System Data Acquisition Module
The IRM Reader module is designed to receive information from sensors and radio interfaces for transferring them to the CAM-5 module as part of the...
Temperature sensor SAW
Wireless temperature sensor with “SAW” technology included in the IntelliSAW continuous monitoring system for medium voltage equipment
e-KAM Primary Current Test System
Designed for fully automatic testing of relay protection devices, circuit breakers and current transformers with a primary current of up to 7000 A...
KAM Primary Current Test System
The system is designed to load relay protection devices, circuit breakers and current transformers with primary current up to 7000 A during maintenance...
CBA-1000 High Voltage Circuit Breaker Tester
System for monitoring the basic parameters of medium and high voltage class circuit breakers. The unit can test oil, SF6 and vacuum circuit breakers in...
GECC-3000/1500 auxiliary current supply modules
Operating current power supply modules for testing high-voltage circuit breakers, DC motors, protection systems and other equipment requiring auxiliary...
CBA-2000 High Voltage Circuit Breaker Tester
System for monitoring the basic parameters of medium and high voltage class circuit breakers. Tests oil, gas and vacuum circuit breakers in three-phase...
CBA-3000 High Voltage Circuit Breaker Tester
A universal system that allows you to carry out a full range of tests of any type of circuit breaker (oil, SF6, air) medium and high voltage in a...
BTS-200 Battery Test System
A device for testing all types of batteries using the battery discharge method. Testing batteries from 24 to 240V with a maximum discharge current of...
ELU200 Load Unit
ELU200 load block is used with BTS-200 to provide higher discharge current to the battery under test
iCT1 Automatic current and voltage transformer testing device
The iCT1 is a portable device designed for testing current, voltage and combination transformers.
T-2000 Current and voltage transformer testing device
Multifunctional system for testing current transformers (CT), voltage transformers (VT), power transformers, overcurrent protection, electricity meters,...
DRTS 66 Device for testing all types of relay protection devices
The testing complex is designed to test all types of relay protection devices of all generations, from electromechanical and semiconductor to...
T-1000 PLUS Device for testing relay protection devices in single-phase mode
The T-1000 PLUS device is designed for testing various types of relay protection devices and other primary and secondary equipment in single-phase mode....
DRTS 33 Device for testing all types of relay protection devices
The testing complex is designed to test all types of relay protection devices of all generations, from electromechanical and semiconductor to...
DRTS 34 Device for testing all types of relay protection devices
The testing complex is designed to test all types of relay protection devices of all generations - from electromechanical and semiconductor to...
T-3000 Comprehensive device for testing relay protection devices in single-phase mode, CT and VT
Multifunctional system for testing relay protection devices in single-phase mode, current transformers (CT), voltage transformers (VT), power...
Reltest 1000 Device for testing relay protection devices
The Reltest 1000 is designed to test relay protection devices in distribution networks, SmartGrid networks and networks with a renewable energy source....
TD-1000 PLUS Device for testing relay protection devices in single-phase mode
The TD-1000 device is designed to test various types of relay protection devices and other primary and secondary equipment in single-phase mode....
DRTS 64 Device for testing all types of relay protection devices
The DRTS 64 testing complex is designed to test all types of relay protection devices of all generations - from electromechanical and semiconductor to...
STS 4000 TD Comprehensive testing system for transformers and substation equipment
The STS-4000 TD system is designed for inspection and electrical testing of power transformers, current transformers, voltage transformers, high-voltage...
STS-5000 Device for comprehensive testing of transformers and substation equipment
The STS-5000 is designed for testing power transformers, current transformers, voltage transformers, high-voltage circuit breakers, generators,...
Set “Step and Touch Tension”
The touch and step voltage and ground resistance measurement kit consists of: STLG and STSG modules and accessories for measuring soil resistivity,...
STCS - Switch
The switch module is an option for the STS 5000 TD/STS 4000 TD systems and is designed to switch signals for measuring the electrical parameters of a...
RCDT Compensating rectifier for measuring dissipation tangent and capacitance
The module is an option for the STS 5000 TD/STS 4000 TD + TD 5000 or TDX 5000 systems and is designed to measure the dissipation tangent of high...
STOIL Cell for measuring oil dielectric loss tangent
The module is an option for the STS 5000/STS 4000 + TD 5000 or TDX 5000 systems and is designed to measure the dielectric loss tangent of liquid...
Line Impedance Kit
The line impedance measurement kit consists of two modules: STLG and STSG. The kit is an option for the STS 5000/STS 4000/e-KAM systems and is designed...
TD-5000 Dielectric tangent and capacitance measurement module
The module is an option for STS 5000/4000 systems and is designed to measure the dielectric loss tangent and capacitance of transformers and other...
STCS PLUS Switch
The switch module is an option for the STS-5000 TD/STS-4000 TD systems and is designed to switch signals for measuring the electrical parameters of a...
TDX-5000 Loss tangent and capacitance measurement system
The TDX-5000 system is designed to measure the dielectric loss tangent and capacitance of transformers and other electrical equipment at voltages up to...
MicroAQUILA Portable partial discharge analyzer
MicroAQUILA is a versatile and reliable device for diagnosing partial discharges (PD). This portable and multifunctional PD detection system is suitable...
PDBaseII Partial Discharge Meter
The device is intended for measuring partial discharges in electrical equipment of a substation, primarily for periodic testing or for equipment quality...
Falcon Techimp PD Medium Voltage Monitoring Device
The device is designed for online monitoring of partial discharges in medium voltage electrical equipment. This device implements all the latest...
ALFA Device for online diagnostics and monitoring of partial discharges
The device is designed for online diagnostics of partial discharges in substation electrical equipment using a license. It is suitable for those...
PDCheck Partial discharge monitoring device
The PDCheck device is designed for online monitoring of partial discharges in substation electrical equipment. Partial discharge measurement is one of...
Aquila Device for online diagnostics and monitoring of partial discharges
The device is designed for online diagnostics of partial discharges in substation electrical equipment. Partial discharge measurement is one of the most...
PDScope Partial discharge monitoring device
The device is designed for online monitoring of partial discharges in substation electrical equipment. It is part of the PDCHeck family of instruments...
SHIRLA Device for locating shell damage
The universal SHIRLA system is designed for testing cables and cable sheaths, as well as searching for locations of cable damage, including single-phase...
REIS-405 Reflectometer
REIS-405 is a powerful and compact reflectometer manufactured by STELL, designed to determine fault locations in power cable lines. The device is...
PU-90M Mobile burning unit
The PU-90M mobile burning unit burns and burns the insulation of cable lines in the process of searching for damage. Maximum afterburning current - 90A...
CST-15 Locator kit
CST-15 is a kit for determining the routes of cables, pipes and other underground utilities. Using the induction method, it determines the location of...
CSL-10 Search kit for precise location of cable faults
The CSL-10 search kit is designed to accurately determine the location of faults in power cable lines using acoustic and acoustic-electromagnetic...
PHG 70 TD/PD Cable testing and diagnostic system
System for testing 6-35 kV cables with cross-linked polyethylene insulation with variable frequency voltage 0.1 Hz (VLF) with the ability to measure...
PD-TaD 80 Portable PD diagnostic system
The portable system PD-TaD 80 in combination with high-voltage VLF (VLF) units from BAUR is used for diagnosing cable lines by measuring and localizing...
PHG 80 TD/PD Cable testing and diagnostic system
System for testing 6-35 kV cables with cross-linked polyethylene insulation with variable frequency voltage 0.1 Hz (VLF) with the ability to measure...
tracy PD indicator
The tracy device manufactured by BAUR is designed for localizing PD in a cable using an inductor.
PD-TaD 62 Portable PD diagnostic system
The portable system PD-TaD 62 in combination with high-voltage VLF (VLF) installations from BAUR is used for diagnosing 6-35 kV cable lines using the...
CableScan mini+ Kit for identifying fault locations and cable tracing
"CableScan Mini +" is a set of devices for identifying fault locations (LPF) of power cables of all types of insulation using modern...
CableScan-40 Mobile system for detecting damage to power cables
Multifunctional mobile system for searching for damage to power cables of all types of insulation using modern non-burning methods
CableScan-40P Mobile installation for detecting damage to power cables
CableScan-40P is a mobile portable unit for identifying fault locations in medium voltage cables using non-burning methods: pulse reflectometry (TDR),...
CableScan mini portable kit for locating cable faults
CableScan-Mini is a set of devices for determining the location of fault (LP) of power cables of all types of insulation using modern non-burning methods.
GVI-32/2000 High-voltage pulse generator
The GVI-32 device produced by Energoscan is designed for preliminary detection of cable damage. Maximum voltage 32 kV. Pulse strength 2000 J. Used with...
GVI-36M Portable high-voltage pulse generator
Designed to accurately determine the location of cable damage (OMP) using the acoustic method and determine the breakdown voltage of the damage. Also,...